3333----3333----3 Removing the Wound (Used) Ribbon
3 Removing the Wound (Used) Ribbon
3 Removing the Wound (Used) Ribbon
3 Removing the Wound (Used) Ribbon
a) When the wound ribbon is tied with the Ribbon Stocker, cut the ribbon with a knife
or scissors to free the take-up spool.
b) Remove the Ribbon Rewinder by holding the left end of the spool and lift it while
sliding it toward the right.
c) Return the knob of the Rewinder to its original position as shown in fig. 3-11.
d) Remove the used ribbon from around the Rewinder, and discard it in accordance
with the manner set by the local municipal office of your area.
e) Return the Ribbon Rewinder to its original position by putting the spool in the
groove on the right side of the spool holder, and rotate the spool so that the groove
can catch it.
