3333----7 Test Printing
7 Test Printing
7 Test Printing
7 Test Printing
Please take procedure in “3-6 Procedure of operation” and show ‘Ready’ on LCD
previous to the Test Printing.
1) Press PAUSE to show ‘Pause’ on LCD.
2) Press FEED several times to feed the label and check if the label runs
straightly (without meandering) and also check the absence of ribbon wrinkle.
1) In case of appearance of the ribbon wrinkle, open the print mechanism and
take up the slack of ribbon by rotating the Ribbon Rewinder by hand.
Then close the print mechanism.
The beep sound will ring as you open the print mechanism. Press
PAUSE
to stop the sound. Press
PAUSE
again to show ‘Pause’ on LCD.
4) Press and at same time. The LCD will displays ‘Test Print / Pattern 1’.
5) Press ENTER to execute the test printing.
Press PAUSE to stop and restart the test printing.
Example of test print :
The contents inside the varies depend on the printer type and
ROM version.
