Autonics AiCA Series, Руководство пользователя

Страница: 7 / 131

Safety Considerations
© Copyright Reserved Autonics Co., Ltd. vii
 When connecting the power input, use AWG 18 (0.75mm
2
) cable or over.
 Brake is non-polar. When connecting the brake, use AWG22 (0.3mm
2
) cable or over.
Failure to follow this instruction may result in fire or malfunction due to contact failure.
 Install overcurrent prevention device (e.g. the current breaker, etc) to connect the driver
with power.
Failure to follow this instruction may result in fire.
 Check the control input signal before supplying power to the driver.
Failure to follow this instruction may result in personal injury or product damage by
unexpected signal.
 Install a safety device to maintain the vertical position after turn off the power of this
driver.
Failure to follow this instruction may result in personal injury or product damage by
releasing holding torque of the motor.
 Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or product damage.

Use dry cloth to clean the unit, and do not use water or organic solvent.
Failure to follow this instruction may result in fire or electric shock.

The driver may overheat depending on the environment.
Install the unit in the well ventilated place and forced cooling with a cooling fan.
Failure to follow this instruction may result in product damage and degradation by
heat.

Keep metal chip, dust, and wire residue from flowing into the unit.
Failure to follow this instruction may result in fire or product damage.

Use the designated motor only.
Failure to follow this instruction may result in fire or product damage.
The above specifications, dimensions, etc. are subject to change and some models may
be discontinued without notice.
Be sure to follow cautions written in the instruction manual, user manual, and the
technical descriptions (catalog, website).