Autonics AiCA Series, Руководство пользователя

Страница: 73 / 131

10 Drive
© Copyright Reserved Autonics Co., Ltd. 73
10.1.3 Continuous Mode
At continuous mode, it operates motor continuously when drive signal inputs to the
designated direction.
When STOP signal inputs or limit signal of the direction inputs, it stops.
 Continuous mode drive
1st Drive mode: “MD0”=0, “MD1”=1
2nd Select start drive speed.
: It is available to set the start drive speed combining with “SSP0”, ”SSP1”.
3rd Select max. drive speed.
: It is available to set the max. drive speed combining with “MSP0”, ”MSP1”.
4th Drive: When “+Run” or “ ‒ Run” signal inputs, it drives to CW direction or CCW
direction.
5th Stop: When “STOP” signal inputs or limit signal of the direction inputs, it stops.
6th Emergency stop: When “EMG” signal inputs, it stops emergently.
 If the both signal “+Run” and “-Run” enter at the same time, the motor stops.