Autonics AiCA Series, Руководство пользователя

Страница: 115 / 131

12 Driver Function
© Copyright Reserved Autonics Co., Ltd. 115
12.1.2.4 S Curve (S-curve acceleration/deceleration)
S curve generates an S shape speed curve according to linear increase/decrease of drive
acceleration/deceleration.
It smoothly increases and reduces speed when starting and stopping, and helps achieve
smoother operation.
 a, b, c=Acceleration Time
 d, e, f=Deceleration Time
 S curve occurs at the a, c, d, f zones during the set “S Curve Time”.
 When “S Curve Time” is set the half of “Acceleration Time (=Deceleration Time)”, it
operates S curve without b, e (trapezoidal zone).
Precautions for S curve acceleration/deceleration drive

In a fixed pulse S curve acceleration/deceleration drive, you cannot change speed while
driving.

At S-curve acceleration/deceleration fixed pulse drive, “S Curve Time (S-curve
acceleration/deceleration time)” is set 1/2 of “Acceleration Time (=Deceleration Time)”.
If it is set over 1/2, the drive pulse ends during deceleration before arriving the start
drive speed or it outputs the left drive pulses as start drive speed and does not stop
even though arriving the start drive speed.
 During S curve operation, acceleration/deceleration time should be set as same.
If it is set differently, deceleration time is set same as acceleration time.