Automation Direct D0-DEVNETS, Руководство пользователя

Страница: 16 / 78

Installing the DeviceNet
Slave Module
Installation and
Safety Guidelines
2–5
Installing the D0–DEVNETS Slave Module
D0–DEVNETS DeviceNet Slave
Module User Manual, Rev A
Insert the D0–DEVNETS slave module into the open card slot. Locate the module so
the printed information is oriented in the same direction as the markings on the PLC.
Be careful to align the female connector on the printed circuit board of the module
with the male connector on the PLC mother board. Press the module into the slot
until the front of the module is flush with the front of the PLC.
STATUS
NS
MS
D0–DEVNETS
C0 C4 C2 X1 X3 X4 X6 X11 X13 X14 X16 X21 X23 N.C.
C1 C3 X2 X5 X7 X10 X12 X15 X17 X20 X22 X0 N.C.
AC(N) 24V
0V
N.C.
C1 C3 Y0 Y15 Y12 Y10 Y17 Y7 Y5 Y2
C0 C2 Y16 Y14 Y13 Y11 Y6 Y4 Y3 Y1
LG G
AC(L)
2.0A OUTPUT: 6–240V 50 – 60Hz 2.0A, 6 – 27V
INPUT: 12 – 24V 3 – 15mA
Y
X
40VA 50–60Hz PWR: 100–240V
0 1 2 3 4 5 6 7 10 11 12 13 14 15 16 17 20 21 22 23
PORT1 PORT2
TERM
RUN STOP
PWR
RUN
CPU
TX1
RX1
TX2
RX2
D0–06DR
STATUS
NS
MS
D0–DEVNETS
Insert the Module