Automatic Technology iOpener RD40, Руководство по установке

Страница: 11 / 16

11 www.diyopner.com.au
Remotely Coding Transmitters (optional)
Transmitters can be coded without access
to the opener’s control panel as long as a
pre-coded transmitter is available.
Take a pre-coded transmitter. Press
the button for the function to be
duplicated and release.
Using a small needle, press and hold
fi rmly for two seconds through the
Coding Hole
(Fig. 20).
WITHIN 10 SECONDS take the
additional transmitter you wish to code
and hold a button for two seconds,
pause for two seconds, hold again for
two seconds and then release.
Wait for 10 seconds and then press
the new transmitter’s button to test.
a.
b.
c.
d.
Code The Transmitters
20 fi g
21 fi g
Deleting Transmitter Codes
Deleting a Stored Transmitter Code
Select the transmitter to be deleted.
Press and hold the DOOR CODE
(Fig.
21).
Press the transmitter button you would
like to delete for two seconds, pause
for two seconds, press again for two
seconds and then release.
Release the DOOR CODE BUTTON.
Deleting All Transmitter Codes
Turn off power to the opener.
While switched off, press and hold the
DOOR CODE BUTTON
(Fig. 21).
Turn on power to the opener while
holding this button.
The opener’s LEDs will illuminate for
about fi ve seconds. These LED’s will
turn off and the CODING LED will
illuminate.
Release the DOOR CODE BUTTON. All
stored codes will now be deleted.
a.
b.
c.
d.
a.
b.
c.
d.
e.
STEP #6 STEP #6
(continued) (continued)