Automatic Technology iOpener RD40, Руководство по установке

Страница: 10 / 16

10 iOpener™ RD40 Owner Installation Instructions
1 - Code a Button for Door Operation
Press and hold DOOR CODE (Fig.
16) .
Press one of the four buttons on the
transmitter for two (2) seconds, pause
for two (2) seconds, then press the same
button again for two (2) seconds.
Release DOOR CODE.
2 - Code a Button to the operate the
Courtesy Light
Press and hold LIGHT CODE
(Fig. 17)
.
Press one of the four buttons on the
transmitter for two (2) seconds, pause
for two (2) seconds, then press the same
button again for two (2) seconds.
Release LIGHT CODE.
3 - Code a Button for Pet (Pedestrian)
Mode (optional)
Press and hold both DOOR CODE and
CLOSE
(Fig. 18).
Press one of the four buttons on the
transmitter for two (2) seconds, pause
for two (2) seconds, then press the same
button again for two (2) seconds.
Release DOOR CODE and CLOSE.
4 - Code a Button to Enable Vacation
mode (optional)
The opener can be programmed into a
“Vacation Mode” where the opener will
respond to only one transmitter.
Press and hold LIGHT CODE and
CLOSE buttons
(Fig. 19).
Press one of the four buttons on the
transmitter for two (2) seconds, pause
for two (2) seconds, then press the same
button again for two (2) seconds.
Release LIGHT CODE and CLOSE.
To activate press and hold the coded
button for fi ve seconds.
To reset, press the same button for
two seconds.
a.
b.
c.
a.
b.
c.
a.
b.
c.
a.
b.
c.
d.
e.
Code The Transmitters
16 fi g
17
fi g
18
fi g
19 fi g
STEP #6 STEP #6