AutoGate VPL-24/UL, Инструкция по установке и эксплуатации

Страница: 23 / 46

A
CCESSORY
I
NSTALLATION
E. Gate Auto Timer:
1. Install your timer in the electrical box.
2. Run the power wires to Terminal Strip main power (+ and - ).
3. Run connections 3 & 5 to your Free Exit connections on the Circuit Board #’s 1, 2 or
3 (Open) & 9, 10, 11 or 12 (Common). (Refer to Manufacturers Instructions).
F. Keypads:
1. Refer to your Keypad Manufacturers Instructions for complete wiring.
2. Run the power wires to Terminal Strip main power (+ and - ).
3. The
N.O. & Common signal wires to open the gate need to be attached to the Circuit
Board #’s 1, 2 or 3 (Open) & 9, 10, 11 or 12 (Common) (Refer to Manufacturer’s
Instructions).
G. Card Readers:
1. Refer to your Card Reader Manufacturer’s Instructions for complete wiring.
2. Run the power wires to Terminal Strip main power (+ and - ).
3. The
N.O. & Common signal wires to open the gate need to be attached to the Circuit
Board #’s 1, 2 or 3 (Open) & 9, 10, 11 or 12 (Common) (Refer to Manufacturer’s
Instructions).
4. We recommend using a grounding rod to minimize lightning damage.
H. Phone Systems:
1. Refer to your Phone System Manufacturers Instructions for complete wiring
2. Most phone systems require a dedicated power supply and therefore they may not
function during a power outage.
3. The
N.O. & Common signal wires to open the gate need to be attached to the Circuit
Board #’s 1, 2 or 3 (Open) & 9, 10, 11 or 12 (Common) (Refer to Manufacturer’s
Instructions).
4. We recommend using a grounding rod to minimize lightning damage.
NOTE: Refer to Appendix A3 for approved UL 325 Compliant components.
1.800.944.4283 AutoGate Technical Support
22