manualshive.com logo in svg

Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM, Файл справки, Страница: 1437 / 2577

Поделиться
Скачать
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Скачать руководство пользователя страница 1437

■

Usually, increasing the number of 

substeps

 on page 4085 in the simulation

improves the stability of the simulation.

■

Also for springs and dashpots, avoid attaching objects with very different
masses. Using a Strength value similar to the mass of the objects attached,
and a Damping value of 1/10th of that Strength usually give good results.

■

If you are using 

constraints

 on page 3925, make sure you have aligned the

constraint spaces

 on page 3926 properly.

■

If many objects start the simulation too close too each other (inside

collision tolerance

 on page 4088), reactor will try to push them apart at the

beginning of the simulation. Try increasing the space between them, or
reducing the collision tolerance.

■

If you have constrained two rigid bodies so they are in continuous
contact/penetration (like an upper arm and a forearm), be sure to 

disable

collisions

 on page 4090 between those bodies.

■

Adding 

drag action

 on page 4089 can help damp the overall simulation. Try

increasing the linear drag in the scene.

■

If you are working with Fracture, the 

Fracture Tips

 on page 4017 section

provides information on how to avoid instability.

Cloth/Soft/Rope object stretches too much

If you have attached (using the 

Attach to RB Constraint

 on page 4067) it to a

falling object, be sure to turn off Do Not Affect Rigid Body. If the problem
remains, increase the mass of the Cloth/Soft/Rope, or decrease the mass of
the attached rigid body. Increasing the strength and damping of the
Cloth/Soft/Rope should also improve the situation.

Objects seem to move very slowly

Make sure you are using the proper 

World Scale

 on page 4087 in the scene. A

10cm box falling from a 1m height doesn't behave the same as a 1km box
falling from a height of 10km: The second one will reach the ground much
later). Use real-world units or have a proper mapping between 3ds Max units
and simulation units (

World Scale

 on page 4087).

Why, after simulation, do I get warnings regarding "topology changes"?

The term “topology” refers to the internal connections of the vertices, edges
and faces of a mesh. If you change the number of vertices in a mesh, you are

4118 | Chapter 16   reactor

Содержание 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов