14
Vector Correction
227
3.
Turn on the
Merge Vectors
checkbox to “stick together” vector fragments into
one object.
The lower figure shows the result of applying Merge for these three lines.
4.
Turn on the
Remove Small
checkbox if automatic vectorization created some
vector speckles – i.e. small vector objects that are not required.
The size of a vector speckle is defined in one of following ways: for a line – by
its length, for a circle – by its diameter, for an arc – by its largest projection
onto the X and Y-axis.
Specify the maximum size of speckle – all speckles with a size less or equal to
this value will be removed.
Enter the maximum value for vector speckle in
Remove Small.
The
measurement tool can also be used. Click on
and specify two points on
the document, which define the size of a vector speckle.
Before applying
Remove Small
Result of the
Auto correct
command
5.
Enter the required value of
Correction
Accuracy
in the corresponding box. Use
high
Accuracy
for images of good quality, low for images of poor quality.
6.
Turn on the
Align Lines
checkbox to use the feature of line alignment to
regular angles.
Enter the deviation angle value in
Align Lines
– the command will align regular
angles to those lines who’s deviations from the regular directions are equal to
or smaller than the specified angle.