Autodesk 00126-050008-1620A - Autocad 2006 Essentials Скачать руководство пользователя страница 162

Страница: 162 / 235

WiseImage – User’s Guide

166

The program defines the

Max Width

value equal to the length of the part of the

line that crosses the raster line.

To measure Max Break on an image

1. Click the button next to the

Max Break

box.

2. Specify two points in the raster image, so that the line connecting these points

crosses the largest gap in the raster line.

The program defines the

Max Break

value equal to the length of the part of the

line that covers the raster background.

Raster Snap Modes

The raster snap modes implemented in WiseImage are the same as AutoCAD’s
object snap modes and work in the same way.

This table provides the names of raster snap modes, which can be used to snap to

points of raster objects.

Name

Description

Endpoint

Snap to the raster objects endpoints (lines, arcs etc.).

Midpoint

Snap

to the middle of raster objects (lines, arcs etc.).

Center

Snap to the center of a raster arc, circle.

Quadrant

Snap

to the nearest quadrant (the point located under an angle

0, 90, 180 or 270 degrees from center) of arc, circle.

Nearest

Snap

to the point of the raster object located closely to the

indication point.

Intersection

Snap

to the intersections of raster objects (lines, circles, arcs

etc.).

Perpendicular

Snap

to the point of the raster object lying perpendicular to

another object or to its imaginary extension.

Tangent

Snap

to the point on an arc or circle belonging to the tangent of

another object.

Raster Snap on Demand

To snap to a specific point of a raster object, the raster snap cursor menu is used.
To open the raster snap cursor menu, right-click with the CTRL pressed.

To snap to the characteristic point of a raster object

1. During the execution of any object construction command, in reply to the point

input prompt, select the object snap mode from the cursor menu or

rImage >

Snap

menu.

2. Move the cursor to a position close to the required snap point and click. You will

see a highlight marker and tooltips.

Содержание 00126-050008-1620A - Autocad 2006 Essentials












































































































































































































































Результаты поиска

Содержание 00126-050008-1620A - Autocad 2006 Essentials

Отзывы:

Autodesk 00126-050008-1620A - Autocad 2006 Essentials, Руководство пользователя, Страница: 162 / 235

Результаты поиска

Содержание 00126-050008-1620A - Autocad 2006 Essentials

Отзывы: