Aumuller SP 8 Series, Руководство по сборке

Страница: 15 / 36

Assembly Instructions
•
Spindle Drive SP -24 V / 230 V 9000002601.doc Page
15
of
34
Tools required
Depending on the application different tools will
be needed to fasten the drives and brackets
on the window:
- marker
- centre punch
- hammer
- Knife
- screwdrivers: for slotted-head,
Philips-tip or torx-head screws
(depending on the screws used)
- Spanner sets with
SW 13 and SW 14
- hexagonal wrench for
SW 2,5 / 3 / 4 / 5
- possibly a tool for blind rivet
nuts of size M6
- Torque wrench
- power drill with appropriate
sizes and types of drill bits
for aluminium / steel /
wood / plastic
- Threadlocker adhesive
Assembly Requirements
L
O
C
T
IT
E
9
When installing the „partly incomplete machine„
Spindle drive type:
SP 8 xxx in 24 V DC
SP 8-Z xxx in 230 V DC
the following requirements must be met in order to allow
correct assembly with other components to produce a
complete machine without compromising health and safety
of people:
1. The assembly steps / instructions provided must be
followed exactly and complied with.
2. The type of drive to be used must be selected to suit
the specified range of application (appropriate stroke,
stroke force and installation length).
3. Proper fastening accessories (brackets, casement
brackets) must be selected for the particular activation
type selected. Profile-dependent drilling hole patterns
must be adhered to.
4. The fasteners (screws) to be selected for fastening the
drive to the window must be compatible with the
window material (aluminium, wood, plastic, steel).
5. The installer must use tools in safety-related flawless
condition for the assembly and should be aware of all
hazards associated with the mechanical and electrical
components.
6. The electrical connection must be carried out by
authorized electrical contractors in accordance with
the generally applicable DIN and VDE provisions.
7. There must be adequate space on the frame and on
the casement to accommodate a drive.
8. The risk assessment for the power-operated window
must be carried out in advance and, where applicable,
safety measures must be taken to reduce the risk.
The end user must be notified of the remaining risks.
9. Before installing check that the window is in a faultless
mechanical condition. It should open and close easily.