Aumuller SP 8 Series, Руководство по сборке

Страница: 22 / 36

Page
22
of
34
9000002601.doc Assembly Instructions
•
Spindle Drive SP -24 V / 230 V
General installation advices
Adjustment possibilities
- openings may not be sealed with any materials whatsoever
- do not insert objects such as wire, screw drivers, etc.
in openings
Adjustment possibility for disconnection
- loosen lock nut
- manually turn AS inward and / or outward
(dependent on assembly)
- tighten lock nut again
- ensure that drive shuts off via end switch and not
via overload
Do not seal
openings in housing
End switch
Locknut
M8-low
SW13
AS
The end switch has to be pushed/activated
when the window is closed.
End switch CLOSED
(= delivery condition)
Drive switches off on overload
End switch
not activated
15