AUMA SGExC 05.1, Руководство по эксплуатации

Страница: 27 / 80

●
Group
S
= Status indications
●
Group M = Menu (settings)
●
Group D = Diagnostic indications
The active group is displayed in the top right corner of the display.
Change from group
S
to group
M
:
1. Press push button
C
and hold it down for approx. 3 seconds until group
M0
appears.
Change from group S to group D :
2. Press push button C and hold it down until group D0 is displayed.
➥ (Thereby, group
M
is skipped.)
Return from group
M
or group
D
to group
S
:
3. Briefly press
C
.
Scrolling within a group:
4. Press or .
➥ The triangles in the top left corner of the display indicate which direction of
scrolling (within one group) is possible.
6.4 Password entry
In the menu (group M ), the settings are password protected. To change the
parameters, a password must be entered first. The following default password is set
in the factory:
0000 .
After selecting EDIT , the following is displayed:
ENTER PASSWORD
0 * * *
:EDIT :OK C:ESC
Step by step:
1. Select figures 0 to 9: Press .
2.
Move to the next position: Press .
3. Repeat steps 1 and 2 for all four digits.
4. To cancel a process: Press C.
Information If no input is received over a longer period of time (approx. 10 min.), the controls
automatically return to status indication S0 .
27
SGExC 05.1 – SGExC 12.1 Control unit: electronic (MWG)
ACExC 01.1 Non-Intrusive
Operation