27
Powering and Charging
Powering the Display Unit
The Display Unit is meant to be used with the GA-CD0002 Charging
Adaptor- Display Unit plugged in. If, for some reason, the Display Unit is
disconnected from the charging adaptor, proceed with the following steps
to charge and power the Display Unit.
The Display Unit will alarm the user when the Display Unit itself is low on
battery.
1. Insert the micro-USB cable end of the GA-CD0002 Charging
Adaptor- Display Unit into the Display Unit and plug the wall adaptor
to a power outlet.
2. Place the Display Unit on the stand provided
.
NOTE: The LED indicator will light red when charging and light blue
when fully charged.
CAUTION!
Only use adaptors supplied or manufactured by
Taiwan Aulisa Medical Devices Technologies, Inc.
