14
a. Remove the top paper liner of the adhesive patch
b. Attach the top of the adhesive patch onto the back of the Infant
Oximeter Module
IMPORTANT! The clear window on the Infant Oximeter Module
Adhesive Patch must align with the sensor
probe of the Infant Oximeter Module.
Remove the bottom paper liner of the adhesive patch
c. Attach the bottom of the adhesive patch onto the back of the Infant
Oximeter Module, pressing down to smooth out the surface so no
air bubbles remain
d. Remove the plastic liner of the adhesive patch
NOTE:
Infant Oximeter Module Adhesive Patches are disposable and
for
single use only.
8. Attach the Infant Oximeter Module
(SM) to the patient’s foot following
the instructions below.
