26
Default Alarm Settings
Follow the instructions below to restore alarm settings to default values.
1. Ensure there is a connection established between the Display Unit and
the Infant Oximeter Module.
(See “Device Pairing” section on page 16
for more information.)
2. Tap on
“SETTING” button located on the top right corner of the MAIN
screen.
3. Tap on
“DEFAULT ALARM.”
4. Tap on
“CONFIRM” to restore alarm limits to manufacturer-configured
values.
NOTE: The following table describes the default alarm presets.
Alarm
Factory
Default
SpO
2
Upper Alarm Limit
Off
SpO
2
Lower Alarm Limit
85%
Pulse Rate Upper Alarm Limit
200 bpm
Pulse Rate Lower Alarm Limit
75 bpm
NOTE: Default alarm can be restored only when the connection is
established.
