28
Charging the Infant Oximeter Module
Charge the Infant Oximeter Module with the wireless charging case by
following the steps below.
NOTE: The Display Unit will alarm the user when the Infant
Oximeter Module is low on battery. Once on low battery, the
Infant Oximeter Module will work for up to another 2 hours
(working time on low battery depends on user)
1. Connect the GA-CS0001 Charging Adaptor- Wireless Charging
Case to wireless charging case and a power outlet.
2. Open the cover of the wireless charging case and place the Infant
Oximeter Module inside as shown below.
3. Close the cover of the wireless charging case.
NOTE: The power LED on the Infant Oximeter Module will light blue
while
charging and turn off, when fully charged.
NOTE: The charging LED on wireless charging case will
automatically light blue when charging SM and turn off,
when not in use.
NOTE: It takes about 3 hours to fully charge the Infant Oximeter
Module.
NOTE: The Infant Oximeter Module will turn itself on automatically
when the wireless charging case is opened; and, the power
LED will light green when the power is ON.
