Audison bit Ten D, Руководство для продвинутых пользователей

Страница: 6 / 50

ADVANCED MANUAL / bit Ten D /
6
1.
AUX IN L - R;
auxiliary low-level stereo input.
The bit Ten D comes with an auxiliary stereo signal input to connect an external source, mp3 player, audio
sources. Input sensitivity is adjustable from 0.6 to 5 V RMS.
2. INPUTS; RL - FL - FR - RR. Hi-level MASTER inputs (SPEAKERS) .
The bit Ten D comes with 4 HI-LEVEL signal inputs to connect amplified signal cables coming from the main
analog source. Input sensitivity is adjustable from 2 to 15 V RMS.
Remark: If a low-level output source (PRE OUT) with output signal equal or greater than 2 V RMS is available, you
can connect it to the high-level MASTER inputs (SPEAKERS).
Sensitivity is increased by adjusting the IN LEVEL controls
(see 8.1.2 - 8.1.9)
.
3. PHONE; input for phone hands-free kits.
IN
+ -
: Connect the audio output cables coming from the hands-free kit system in use. Input sensitivity is
adjustable from 2 to 15 V RMS.
MUTE:
Connect the hands-free kit remote mute control
(MUTE / PHONE MUTE)
. This control works by
earthing the terminal.
Remark: The PHONE MUTE terminal can be used also to enable the AUX input
(see 8.6.5)
.
In this case the PHONE input won’t be active
4.
Optical digital S/PDIF input
Connect an optical fibre cable with TOSLINK connector. On its inputs the bit Ten D accepts PCM signals up to
96kHz sampling frequency
(see section 5.6)
.
4.2 INPUT SIGNALS
4
1
2
3
1: violet
2: gray
3: white
4: green
5: red
6: pink
7: brown
9: blue
10: cyan (light blue)
11: violet
12: gray
13: white
14: green
15: red
16: pink
17: orange
18: yellow
20: black
4