Audison bit Ten D, Руководство для продвинутых пользователей

Страница: 45 / 50

ADVANCED MANUAL / bit Ten D /
45
10. DRC - DIGITAL REMOTE CONTROL
The DRC is the bit Ten D remote control system. It is a microprocessor digital system that also controls and monitors
the amplifiers equipped with the AC Link bus control, if present.
When it is turned on the first time, the display will show the firmware version installed in the DRC.
When the
bit Ten D is setup through the PC, the DRC can stay connected but its display will show the message
“PC control - DRC is disabled”.
The DRC features are:
- bit Ten D power on / off;
- Main volume control;
- Subwoofer volume control;
- Front / Rear fader control;
- Set sources selection;
- Memory selection.
To access the Right / Left balance push
button
2 and turn the knob to adjust it.
Volume can be adjusted either by turning the
main knob or pressing button
1 and then turning
the knob. The volume range goes from -60
(min.) to 0 dB (max.).
To access the Front / Rear fader push button 3
and turn the knob to adjust it.
Independent volume for the Subwoofer only
acts if a channel named Subwoofer has been
set during setup. Press button
4 and turn the
knob for an adjustment from -MUTE (min.)
to 0 dB (from -11.5 to 0 dB at 0.5 steps).
Volume control
Default function
10
1
2
3
4
MAIN SCREEN
PRESS PRESS
PRESS
Select
the Input.
DRC CONTROL DA PC
BACK TO MASTER
PRESS
TURN
1 2 3 4
bit Ten D ON
bit Ten D OFF
Press Shortly
Press for 2 seconds