Audiovox NVX225 страница 69 Скачать руководство пользователя | Manualshive

Страница: 69 / 91

background image

69

Note: Excluding a route is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded road
types, The NVX225 Navigator will use them but only as much as necessary. In this
case a warning icon will be shown on the Route Information screen (4.6), and the
road not matching your preference will be displayed in red (yellow at night) on the
map.

5.4.4.1 Unpaved

Roads

Unpaved roads are excluded by default, as they can be in a bad condition and you
usually cannot reach the speed limit on them.

5.4.4.2 Motorways

When driving a slow car or towing another vehicle, you may prefer not to take
motorways. In this case change the default green to red.

5.4.4.3 Ferries

The accessibility of temporary ferries is not necessarily included in the map data.
Furthermore you may need to pay fare, so you may consider disabling them from the
preset enabled status.

5.4.4.4 U-turns

Although displayed amongst road types, this is a type of action. Most drivers prefer to
replace them with a few normal left and/or right turns in the next few junctions, so it is
disabled by default.

Turning back on dual carriageways is not considered as a u-turn.

Note: If you are not totally against u-turns, leave them on here, and add a certain
penalty (equivalent extra distance to travel) in Advanced settings Route options
(5.6.4.2).

Note: Via points are handled as stopovers with regards to u-turns. It means disabling
u-turns on this page will avoid u-turns during the entire route if possible, but when
reaching a via point, the following part of the route may be planned starting in the
opposite direction.

«
...
67
68
69
70
71
...
»

Содержание NVX225




























































































Отзывы:

Нет отзывов

Похожие инструкции для NVX225

Бренд: GPSMileageTracker Страницы: 5

Бренд: T-Mark Страницы: 14

Бренд: Garmin Страницы: 4

Бренд: Navman Страницы: 88

Cyclo 500 series

Бренд: Mio Страницы: 32

Бренд: Mictrack Страницы: 9

Бренд: Garmin Страницы: 18

Бренд: IntelliTrac Страницы: 6

Бренд: WatchDog Страницы: 2

Бренд: GoPass Страницы: 2

Бренд: GoPass Страницы: 2

HawkEye 7200A-BB2327

Бренд: Blue Sky Network Страницы: 27

Бренд: AOVX Страницы: 14

860 PRO PersonalMate

Бренд: Transystem Страницы: 28

Бренд: NorthStar Страницы: 68

Бренд: TAG Страницы: 8

GPS SPEED CAMERA WARNING DEVICE RCD-1000

Бренд: RoyalTek Страницы: 18

Бренд: Groupe Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды