Audiovox NVX225, Руководство пользователя

Страница: 29 / 91

29
These icons are large enough to recognize the symbol, and semi-transparent so as
not to cover the streets and junctions behind them.
When the map is zoomed out, the icons are not shown. As you zoom in, small dots
appear at the locations of visible POIs. Zooming in further makes the full icons
appear.
If two points are too close to each other so that icons overlap, a multi-POI icon is
shown instead of individual ones. Zoom in more to see them separately. (Should the
two POIs have the same icon, this icon will be displayed instead of the multi-POI
icon.)
Note: When navigating, POI icons can be disabled together with street names
(5.2.4). If you still need this information during your journey, just drag the map to
disable Lock-to-Position (4.5.4). This will restore street names and POI icons
immediately. Now press Enter or tap Lock to reactivate Lock-to-Position.
Tip: Tap the map on or near a POI item to see the list of the names of the nearest
POIs in a popup list, if it is enabled (4.7.2.5). To see the details of a particular POI in
the list, tap the blue ’i’ icon on the right. If you have too may POIs nearby, this list
may not be complete. In the Cursor menu (4.5.13) there is a button called POI that
leads you to the screen of all nearby POI items. There you can open them one by
one to see their details, and select any of them as a route point.
4.4.10 Elements of the Active Route
The NVX225 Navigator uses a multi-destination routing system in which you have a
start point (your current location if GPS position is available), a destination, the line of
the active leg of the route, and optionally via points and inactive legs. They are all
shown on the map.
4.4.10.1 The start point, via points and the destination
Flags represent these points.
4.4.10.2 Animated turn guidance
Animated arrows represent all route events other than the above-mentioned special
points. These arrows show the direction in which you need to continue your journey.