background image

68

5.4.2 Route

Here you can choose from three different route types.

5.4.2.1 Shortest

Choosing Shortest will result in a route that has the smallest total distance of all
possible routes between the given points. Pedestrians, cyclists or slow vehicles
usually prefer this.

5.4.2.2 Fastest

Choosing Fastest will result in the quickest possible route, given that you can travel
at or near the speed limits on all included roads. This is usually preferred for fast and
normal cars.

5.4.2.3 Economical

This setting is a wise combination of the previous two. Although basically going for
the fastest solution, if there is another route taking a bit more time but a lot less
distance compared to the fastest one, The NVX225 Navigator will choose this one
instead to save fuel.

5.4.3 Vehicle

You can set the type of the vehicle that you will use to navigate the route. Based
upon this setting, some of the road types will be excluded from the route (e.g.
motorways for pedestrians), or some of the restrictions may not be taken into account
(e.g. emergency vehicles have no restrictions). Available values:

 Car

 Taxi

 Bus

 Lorry

 Emergency

 Bicycle

 Pedestrian

5.4.4  Road types to include/exclude

To let the route fit your needs you can also set which road types are to be considered
for or to be excluded from the route if possible. When a road type is selected, its
lamp is green, if not, it turns red and is crossed-out as already described in 3.2.5.

Содержание NVX225




























































































Отзывы: