SIP User's Manual
98
Document #: LTRT-68808
Mediant
2000
Table
3-21: CAS State Machine Parameters Description
Parameter
Description
Generate Digit On Time
[CasStateMachineGenerateDigitOnTime]
Generates digit on-time (in msec).
The value must be a positive value. The
default value is -1.
Generate Inter Digit Time
[CasStateMachineGenerateInterDigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The
default value is -1.
DTMF Max Detection Time
[CasStateMachineDTMFMaxOnDetectionTime]
Detects digit maximum on time (according
to DSP detection information event) in msec
units.
The value must be a positive value. The
default value is -1.
DTMF Min Detection Time
[CasStateMachineDTMFMinOnDetectionTime]
Detects digit minimum on time (according to
DSP detection information event) in msec
units. The digit time length must be longer
than this value to receive a detection. Any
number may be used, but the value must be
less than
CasStateMachineDTMFMaxOnDetectionTi
me.
The value must be a positive value. The
default value is -1.
MAX Incoming Address Digits
[CasStateMachineMaxNumOfIncomingAddressDigi
ts]
Defines the limitation for the maximum
address digits that need to be collected.
After reaching this number of digits, the
collection of address digits is stopped.
The value must be an integer. The default
value is -1.
MAX Incoming ANI Digits
[CasStateMachineMaxNumOfIncomingANIDigits]
Defines the limitation for the maximum ANI
digits that need to be collected. After
reaching this number of digits, the collection
of ANI digits is stopped.
The value must be an integer. The default
value is -1.
Collet ANI
[CasStateMachineCollectANI]
In some cases, when the state machine
handles the ANI collection (not related to
MFCR2), you can control the state machine
to collect ANI or discard ANI.
[0]
No = Don't collect ANI.
[1]
Yes = Collect ANI.
[-1]
Default = Default value.
Digit Signaling System
[CasStateMachineDigitSignalingSystem]
Defines which Signaling System to use in
both directions (detection\generation).
[0]
DTMF = Uses DTMF signaling.
[1]
MF = Uses MF signaling (default).
[-1]
Default = Default value.
Содержание Mediant 2000
