AudioCodes Mediant 2000, Руководство пользователя

Страница: 86 / 418

SIP User's Manual 86 Document #: LTRT-68808
Mediant 2000
ini File Field Name
Web Parameter Name
Valid Range and Description
ƒ
[13]
T1 5ESS 10 ISDN
ƒ
[14]
T1 DMS100 ISDN
ƒ
[15]
J1 TRANSPARENT
ƒ
[16]
T1 NTT ISDN = Japan - Nippon Telegraph
ƒ
[17]
E1 AUSTEL ISDN = Australian Telecom
ƒ
[18]
T1 HKT ISDN = Hong Kong - HKT
ƒ
[19]
E1 KOR ISDN = Korean operator
ƒ
[20]
T1 HKT ISDN = Hong Kong - HKT over T1
ƒ
[21]
E1 QSIG
ƒ
[23]
T1 QSIG
ƒ
[30]
E1 FRENCH VN6 ISDN
ƒ
[31]
E1 FRENCH VN3 ISDN
ƒ
[35]
T1 DMS100 Meridian ISDN
ƒ
[40]
E1 NI2 ISDN
ƒ
[41]
E1 CAS R15
Note:
The device simultaneously supports different variants of CAS
and PRI protocols on different E1/T1 spans (no more than four
simultaneous PRI variants). The device simultaneously supports
different BRI variants
Trunk Configuration
Clock Master
[ClockMaster]
Determines the Tx clock source of the E1/T1 line.
ƒ
[0]
Recovered = Generate the clock according to the Rx of the
E1/T1 line (default).
ƒ
[1]
Generated = Generate the clock according to the internal
TDM bus.
Notes:
ƒ
The source of the internal TDM bus clock is determined by the
parameter TDMBusClockSource.
ƒ
For detailed information on configuring the device's clock
settings, refer to ''Clock Settings'' on page
393 .
Auto Clock Trunk Priority
[AutoClockTrunkPriority]
Defines the trunk priority for auto-clock fallback (per trunk
parameter).
ƒ
0 to 99 = priority (0 is the highest = default).
ƒ
100 = the SW never performs a fallback to that trunk (usually
used to mark untrusted source of clock).
Note:
Fallback is enabled when the TDMBusPSTNAutoClockEnable
parameter is set to 1.
Line Code
[LineCode]
Use to select B8ZS or AMI for T1 spans, and HDB3 or AMI for E1
spans.
ƒ
[0]
B8ZS = use B8ZS line code (for T1 trunks only) default.
ƒ
[1]
AMI = use AMI line code.
ƒ
[2]
HDB3 = use HDB3 line code (for E1 trunks only).
Line Build Out Loss Defines the line build out loss for the selected T1 trunk.