AudioCodes Mediant 2000, Руководство пользователя

Страница: 91 / 418

Version 5.6 91 November 2008
SIP User's Manual 3. Web-Based Management
ini File Field Name
Web Parameter Name
Valid Range and Description
ƒ
[2147483648]
NS 5ESS NATIONAL = Use the National mode of
AT&T 5ESS for B-channel maintenance.
Note:
To configure the device to support several ISDNIBehavior
features, add the individual feature values. For example, to support
both [512] and [2048] features, set ISDNIBehavior = 2560 (i.e., 512 +
2048).
Outgoing Calls Behavior
[ISDNOutCallsBehavior]
This parameter determines several behaviour options that influence
the behaviour of the ISDN Stack outgoing calls. To select options,
click the arrow button, and then for each required option, select 1 to
enable. The default is 0 (i.e., disable).
ƒ
[2]
USER SENDING COMPLETE =When this bit is set, the
device doesn't automatically generate the information element
Sending-Complete IE in the SETUP message. If this bit is not set,
the device generates it automatically in the SETUP message
only.
ƒ
[16]
USE MU LAW = When set, the device sends G.711-m-Law
in outgoing voice calls. When disabled, the device sends G.711-
A-Law in outgoing voice calls. (Applicable only to the Korean
variant.)
ƒ
[128]
DIAL WITH KEYPAD = When enabled, the device uses the
Keypad IE to store the called number digits instead of the
CALLED_NB IE. (Only applicable to the KOR variant (Korean
network). Useful for Korean switches that don't accept the
CALLED_NB IE.)
ƒ
[256]
STORE CHAN ID IN SETUP =When this bit is set, the
device forces the sending of a Channel-Id IE in an outgoing
SETUP message even if it's not required by the standard (i.e.,
optional), and no Channel-Id has been specified in the
establishment request. This is useful for improving required
compatibility with switches. On PRI lines, it indicates an unused
channel ID, preferred only.
ƒ
[572]
USE A LAW = When set, the device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends the default
G.711-Law in outgoing voice calls. Applicable to E10 variant.
ƒ
[1024]
= Numbering plan / type for T1 IP-to-Tel calling numbers
are defined according to the manipulation tables or according to
the RPID header (default). Otherwise, the plan / type for T1 calls
are set according to the length of the calling number.
ƒ
[2048]
= When this bit is set, the device accepts any IA5
character in the called_nb and calling_nb strings and sends any
IA5 character in the called_nb, and is not restricted to extended
digits only (i.e., 0-9,*,#).
ƒ
[16384]
DLCI REVERSED OPTION = Behavior bit used in the
IUA interface groups to indicate that the reversed format of the
DLCI field must be used.
Note:
When using the
ini
file to configure the device to support
several ISDNOutCallsBehavior features, add the individual feature
values. For example, to support both [2] and [16] features, set
ISDNOutCallsBehavior = 18 (i.e., 2 + 16).