AudioCodes Mediant 2000, Руководство пользователя

Страница: 80 / 418

SIP User's Manual 80 Document #: LTRT-68808
Mediant 2000
3.4.2.6 Configuring the DSP Templates
The 'DSP Templates' page allows you to assign up to two DSP templates to the device. In
addition, you can define the percentage of DSP resources allocated per DSP template.
¾
To select DSP templates, take these 5 steps:
1.
Open the 'DSP Templates' page (
Configuration
tab >
Media Settings
menu >
DSP
Templates
page item).
Figure 3-45: DSP Templates Page
2.
Select an index row by clicking the corresponding 'Index' radio button.
3.
Click
Edit
, and then in the 'DSP Template Number' field, enter the desired DSP
template number.
4.
Click
Apply
to save your settings.
5.
To save the changes to flash memory, refer to ''Saving Configuration'' on page 230 .
Notes:
•
If you delete all the table entries, the device uses the default DSP
template.
•
For a description of the Web interface's table command buttons (e.g.,
Duplicate
and
Delete
), refer to ''Working with Tables'' on page 30 .
Table 3-18: DSP Templates Parameters
Parameter Description
DSP Template Number
[DSPVersionTemplateNumber]
Determines the number of the DSP template load. Each load has
a different coder list, channel capacity, and supported features.
For the list of supported DSP template numbers (coders and
channel capacity), refer to the device's
Release Notes
. The
default is 0.
DSP Resources Percentage Resource percentage used for the specified template.