8
System operation
(1) Turn the main power switch on the rear panel [ON].
(2) Turn the power switch on the front panel [ON].
◦
The display lights and the frequency is displayed.
(3) Set the operating frequency (see p. 10).
(4) Turn the transmitter’s power on and sync with receiver (see p. 18).
◦
The RF level indicator lights up.
(5) Check the RF level indicator.
◦
Check that antenna A or B lights up.
(6) Speak into the mic.
◦
Make sure the AF level indicator lights up.
Minimum hold function
(1) Main power switch
(2) Power switch
Rear Panel
Front Panel
RF –A
RF –B
Audio
PEAK
–40 –30 –20 –10 0 +10
(1) When on the main screen, pressing the function button
(FN1) switches the display to main screen 2.
RF –A
RF –B
Audio
PEAK
–40 –30 –20 –10 0 +10
(2) If you press and hold the function button (FN2), the
minimum hold function turns on and its marker is
displayed.
◦
The marker indicates the lowest-level RF signal
received from the transmitter.
◦
The marker does not move even if the input RF level is
higher than the marker position.
◦
If the RF level input is lower than the marker position,
the marker moves in tandem with the RF level.
◦
To reset the marker position, press the Function button
(FN2).
Marker
