13
Setting the lock code
The lock code is a 4-digit number used with the key lock. (Can be set from "0000" to "9999".)
When the key lock function is activated, the lock code is required to access the menu from the main screen.
*The default setting is "0000".
946
a
b
RF
AF
PEAK
+10
0
–10
–20
–30
–40
Audio Settings
Squelch
System Settings
(1) From the main menu, turn the control dial, select
[System Settings] and then press the control dial.
Key Lock
Lock Code
ANT PWR
System Settings
(2) Select [Lock Code] and press the control dial.
0
Key Lock
Lock Code
ANT PWR
System Settings
(3) Turn the dial to select a number and then press the
control dial.
9
Key Lock
Lock Code
ANT PWR
System Settings
(4) Repeat the operation until all 4 numbers are entered and
then press the control dial.
◦
The setting is complete.
Setting the antenna power
This turns power on/off to the antenna input terminals.
*The default setting is [OFF].
*This can only be set from receiver 1.
*If set to [ON], power is supplied to both antennas A and B.
946
a
b
RF
AF
PEAK
+10
0
–10
–20
–30
–40
Audio Settings
Squelch
System Settings
(1) From the main menu, turn the control dial, select
[System Settings] and then press the control dial.
OFF
ON
Key Lock
Lock Code
ANT PWR
System Settings
(2) Select [ANT PWR] and press the control dial.
OFF
ON
Key Lock
Lock Code
ANT PWR
System Settings
(3) Turn the control dial, select [ON] or [OFF] and then press
the control dial.
◦
The setting is complete.
