Audio Technica ATW-R6200 S, Руководство пользователя

Страница: 14 / 24

14
Setting transmitters via IR sync
This function allows you to make transmitter settings on the product and then automatically configure the transmitter via
IR sync.
946
a b
RF AF
PEAK
+10
0
–10
–20
–30
–40
Audio Settings
Squelch
System Settings
(1) From the main menu, turn the control dial, select
[System Settings] and then press the control dial.
Lock Code
RF PWR,HIGH MIC GAIN, 10
KEY LOCK,OFF
BATT ,Alkaline
ANT PWR
TX SET
System Settings
(2) Select [TX SET] and press the control dial.
Lock Code
RF PWR, HIGH MIC GAIN, 10
KEY LOCK,OFF
BATT ,Alkaline
ANT PWR
TX SET
System Settings
(3) To set the [RF PWR], turn the control dial, select [HIGH],
[MID] or [LOW] and then press the control dial.
Lock Code
RF PWR,HIGH MIC GAIN, 10
KEY LOCK,OFF
BATT ,Alkaline
ANT PWR
TX SET
System Settings
(4) To set the [MIC GAIN], turn the control dial, select the
gain and then press the control dial.
◦
The gain can be set in steps of 2dB.
◦
The maximum setting is 20dB.
Lock Code
RF PWR,HIGH MIC GAIN, 10
KEY LOCK, OFF
BATT ,Alkaline
ANT PWR
TX SET
System Settings
(5) To set the [KEY LOCK] (transmitter key lock), turn the
control dial, select [ON] or [OFF] and then press the
control dial.
Lock Code
RF PWR,HIGH MIC GAIN, 10
KEY LOCK,OFF
BATT ,
Alkaline
ANT PWR
TX SET
System Settings
(6) To set the [BATT] (type of battery used in the transmitter),
turn the control dial, select [Alkaline] or [Ni-MH] and then
press the control dial.
Alkaline Select when using alkaline batteries.
Ni-MH Select when using nickel–metal hydride batteries.
◦
The setting is complete.
NOTE: For how to sync a transmitter with the receiver,
refer to "Setting up transmitter via IR sync" (p.18).
Screen saver settings
This sets the length of time before the display turns off from inactivity.
*The default setting is set to "OFF" and the screen does not turn off.
946
a b
RF AF
PEAK
+10
0
–10
–20
–30
–40
Audio Settings
Squelch
System Settings
(1) From the main menu, turn the control dial, select
[System Settings] and then press the control dial.
LCD auto off time
1
minute
ANT PWR
TX SET
Screen Saver
System Settings
(2) Select [Screen Saver] and press the control dial.
LCD auto off time
5
minute
ANT PWR
TX SET
Screen Saver
System Settings
(3) Turn the control dial, select the desired amount of time
and then press the control dial.
◦
The setting is complete.
◦
If you select [OFF], the display will not turn off.
◦
The time can be set from 1 to 99 minutes.