Receiver 1
Receiver 2
5
(1) Power switch
Press the switch to turn the power on.
The display lights up when the power is turned on.
*
There will be a delay of up to 5 seconds between
powering on and audio output from the product.
Press the switch again to turn the power off.
(3) Function buttons
Upper button (FN1): Switches the level meter display.
Lower button (FN2): Minimum hold (only in level meter
display mode).
(2) IR sync window
Use when syncing transmitter to the product.
*This is shared by receivers 1 and 2.
(4) Display
Displays the product state and setting menus.
(5) BACK button
Takes the display back one screen when pressed.
(6) Control dial
Turn to scroll through settings and press to set them.
(7) Headphone monitor
（
6 .3 mm
）
output jack
This is the headphone output jack used for monitoring.
It allows you to monitor receivers 1 and 2.
(8) Headphone channel indicator
Displays which receiver is being monitored, receiver 1
or 2.
(9) Headphone volume
Use when adjusting the volume of the headphones for
monitoring.
Press and release the knob to switch between
receivers 1 and 2.
*Does not affect receiver audio output level.
(9)
(8)
(7)
(6)
(5)
(6)
(5)
(4)
(3)
(4)
(3)
(1) (2)
Part names and functions <front panel>
