27
Getting
.ready
Charging with a PC
To charge with a PC, microUSB cable 01 (sold separately)
is needed. Make sure the direction to connect them properly.
Attempting to forcibly connect may cause a damage.
1
With the engraved side up, insert the
microUSB plug of the microUSB cable 01
(sold separately) into the microUSB terminal
of the ISW11SC horizontally
2
Insert USB plug of the microUSB cable 01
(sold separately) into the USB port of a PC
When charging is finished,
appears on the status bar.
• If the found new hardware screen etc. appears on the PC,
select "キャンセル (Cancel)".
3
When charging is finished, remove the
microUSB cable 01 (sold separately) from the
ISW11SC and PC
Turning the terminal on/off
Turning the terminal on
1
p
(1 sec or more)
The unlock screen is displayed.
Turning the terminal off
1
Press and hold
p
(1 sec or more)
The phone options screen is displayed.
2
[Power off] → [OK]
◎ The common AC adapter 01 (sold separately) uses 100 VAC
used for households in Japan. Use an AC Adapter suitable
for the country you visit for charging overseas. Do not use a
voltage inverter for overseas traveling.
◎ The common AC adapter 02/03 (sold separately) supports 100
to 240 VAC. Use only the common AC adapter 02/03 (sold
separately) for charging overseas.
Charging using the AC adapter (sold separately)
The following describes how to charge the battery pack
using the common AC adapter 03 (sold separately). (Note
that your AC adapter may be different from this illustration.)
It takes about 170 minutes to charge the battery pack.
1
With the engraved side up, insert the
microUSB plug of the common AC adapter 03
(sold separately) into the microUSB terminal
of the ISW11SC horizontally
2
Insert the power plug of the common AC
adapter 03 (sold separately) into the outlet
When charging is finished,
appears on the status bar.
3
When the charging is finished, pull the
microUSB plug of the common AC adapter
03 (sold separately) straight out from the
ISW11SC and the power plug out from the
outlet
