14
Safety
.Precautions
Be aware not to gather dust on the connecter terminal. Doing
so may cause a fault.
Attach or remove the connecter horizontally to or from the
headset terminal of the ISW11SC.
When adjusting the volume, raise the volume a little at a time.
If you raise the volume too much from the outset, sudden loud
noise from the earphone, etc. might adversely affect your ears.
If you feel any abnormality with your skin, immediately consult
a dermatologist. Itching, rashes, eczema, etc. sometimes
occurs depending on your physical constitution and condition.
The materials of parts used on the Stereo Headset with
Microphone (sample) are as follows.
Part
Material
Surface treatment
Exterior of earphone
PC resin
UV coating
Exterior of earphone
(metal part)
PC resin
AL+UV coating
Headphone (neck part) PC resin+NON-PVC
UV coating
Exterior of microphone
with switch
PC +ABS resin
UV coating
Earpieces
Silicon rubber
－
Cable
NON-PVC
－
3.5 mm plug (Body)
POM
－
3.5 mm plug (Metallic
part)
Brass
Copper Nickel
Gold plating
Handling precautions
These precautions are provided to ensure that performance
can be fully demonstrated. Thoroughly read these
precautions to ensure correct use.
■.Precautions.common.to.the.ISW11SC.main.unit,.battery.
pack,.charging.equipment,.au.IC-Card,.peripheral.devices
●
Do not apply excessive force to the ISW11SC during use. Be
sure not to put the product into a tightly packed bag or place a
heavy object on the product in a bag. Sitting on the product in
your pocket might damage the display or internal circuit board
resulting in a malfunction. Keeping an external device connected
to the microUSB terminal or headset terminal might damage the
connector resulting in a malfunction. Such damage and malfunction
are not covered by the warranty, even if there is no external
damage.
●
Do not use the product in extremely hot, cold or humid places. （Use
within an ambient temperature range of 5℃ to 35℃ and humidity
range of 35% to 85%.）
●
Do not use in places subject to lots of dust or vibration.
●
Clean the connection terminals with dry cotton swabs, etc. every
now and then. Soiled terminals might cause poor connection.
Do not exert a strong force to clean the connection terminals to
prevent deformation.
●
Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may scratch
the display. The display may be stained if splash or smear is left
attached to the surface. Wiping the product using alcohol, thinner,
benzene, detergent, etc. might erase the printing on the outer
casing or cause discoloration.
●
Use as far away as possible from land-line phones, TVs, radios, etc.
Use nearby might affect them.
●
The ISW11SC may become warm while charging or during other
operations, depending on the situation, but this is not abnormal.
