10
Safety
.Precautions
Do not light the photo light toward a driver of a car, motorbike
or bicycle. If dazzled by the light, the driver might become
unable to drive and cause an accident.
Sometimes, very rarely some people demonstrate symptoms
such as temporary muscle spasms, loss of consciousness,
etc. by watching repeatedly flickering screens. Those
with a past history of this should consult with a physician
beforehand.
Caution
Be sure to read the following cautions
before use.
Use of the main unit in an automobile sometimes affects on-
vehicle electronic devices, though this rarely happens. If this
happens, stop use since this may impair safe travel.
If you feel any abnormality with your skin, immediately consult
a dermatologist. Itching, rashes, eczema, etc. sometimes
occurs depending on your physical constitution and condition.
The materials of parts used on the ISW11SC are as follows.
Part
Material
Surface treatment
Front case
PC resin
Non-conductive
vacuum metallization
Rear case, Power/
Screen lock key,
Volume/Zoom key
PC resin (PC+GF 20%) UV coating
Battery pack cover
PC resin (PC+GF 10%) Hairline, Coating
Display
Hardened glass
AF coat
Home key
Aluminium
Coating
Out-camera
surrounding part
Stainless steel
Black alumite
Earpiece
Stainless steel
Coating
Camera window
Acrylic sheet
－
Photo light
PC resin
－
Headset connection
terminal
Stainless steel
－
Do not bring the product close to magnetized objects such
as cash cards, floppy disks, credit cards, and prepaid cards.
Doing so might result in loss of recorded information.
Do not allow liquids, metal objects, burnable items, and other
foreign matter to get inside the microSD memory card slot.
Failure to do so might cause fire, electric shock or a fault.
Do not swing the ISW11SC around by holding the hand strap,
Stereo Headset with Microphone (sample), etc. Doing so
might cause an accident or damage.
If you have a weak heart, be careful when setting the incoming
vibration and ringtone volume to prevent adverse effects on
your heart.
Pay attention to items becoming stuck to the main unit. The
speaker uses magnets, and so thumbtacks and pins, craft
knife blades, staples, and other metal objects sometimes
become stuck to the main unit, and cause unexpected injury.
Before using the product, be sure to check that there are no
foreign objects on the speaker or other parts.
Do not place the product directly on sand at a beach, etc.
Sand or other small particles might get inside the earpiece,
microphone or speaker, causing the volume to drop. If
sand gets inside the ISW11SC main unit, it might cause
overheating or a fault.
When using the product for calling or data communication, be
careful not to keep the product in direct contact with your skin
for a prolonged period, or not to cover the product with paper,
cloth, bedding, etc. The main unit might get hot, causing fire,
burns or a fault.
■
Battery.pack
(The.battery.pack.of.the.ISW11SC.is.a.lithium-ion.
battery.)
The battery pack is not fully charged at the time
of purchase. Charge the battery before using the
product. For handling of the lithium-ion battery,
refer to this manual or the manual for the battery
pack (SCI11UAA) (sold separately).
