CHAPTER 2: STATUS TAB
MDU Solutions
®
– UCrypt
®
Monitoring Server - Operation Manual
2-7
2 .3 .7 Re-Identify
This control queries the selected remote Devices for all of their monitored identifi cation parameters such as Firmware, Serial,
SKU, capabilities etc. This may be necessary if a UCrypt Device for example, has been modifi ed or had functionality added or
removed ie. CableCARDs or fi rmware updated.
Procedure
This procedure describes the steps required to Re-identify one or more remote Devices.
1. Click the
Status Tab
if it is not already selected, Figure 2-17.
2. Tick the
selection box
of any remote Devices that need to be Re-identifi ed.
3. Use the drop down menu to select
Re-Identify
.
4. Click the
Go
button.
5. Verify that the correct Device is being Re-Identifi ed, Figure 2-18.
6. Click the
Go
button.
7. A message indicating success is displayed, Figure 2-19. Click
Back to Status page
to return to the Status page.
1
2
3
4
Figure 2-17: Re-Identify Server
5
6
Figure 2-18: Confi rm Re-Identify
7
Figure 2-19: Back to Status Page
