ATTO Technology SC 5550E, Инструкция по установке и эксплуатации

Страница: 50 / 87

42
ATTO Technology Inc. FastStream SC Installation and Operation Manual
8.0 Manage ATTO Devices, Configurations
You may save the current configuration of your FastStream SC, use a configuration from another FastStream, or
change the configurations of other ATTO devices from your current browser using the ExpressNAV Storage
Manager.
If you have other ATTO devices in the same broadcast
domain with no routers between them, and any
switches between this FastStream and the other
devices are configured to forward UDP broadcast
messages, you may physically identify these devices
and manage them from within the browser you are
currently using. You may also save the configuration of the FastStream
you are currently using, or restore it from a previously-
saved configuration, or import a configuration from
another ATTO FastStream.
It is best practice to give your current FastStream a
recognizable name so that you can distinguish it more
easily from among other ATTO devices.
Creating a unique name for your FastStream
You may wish to name your FastStream if you are
going to manage several ATTO devices from one
browser.
1
If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
controller in a standard browser. On the splash
screen, click
Enter Here. In the box provided ,
type in your user name and password, and click
OK .
2 The Monitor page appears. In the left-hand
menu, click on the Manage menu item on the
left side of the screen.
3 Click on the Other Devices arrow.
4 In the Other Devices menu, click on Set
System Name.
5 Click on Next.
6 The System Configuration page appears.
Type in a name for your controller in the text
box provided.
7 Click Commit. The name you typed appears in
the upper right corner of the screen under the
ATTO FastStream SC banner.
Discovering, managing other ATTO devices
1 Follow steps 1-3 in Creating a unique name for
your FastStream above.
2 Click on the Find ATTO Devices button.
3 Click Next.
4 Click on the Rescan button.
5 Select a device from the list. An arrow points to
the controller you are currently using.
6 Press the Identify button to activate a blinking
LED on the selected product. Click on the listed
device again to stop the blinking LED.
7 Click on the device from the list and click on the
Launch in Browser button to view the device's
management console.