16
ATTO Technology Inc. FastStream SC Installation and Operation Manual
After creating RAID Groups
1
If you are not already in the
ExpressNAV Storage
Manager, type the IP address
of your controller in a standard
browser. On the splash
screen, click
Enter Here.
In
the box provided
,
type in your
user name and password, and click
OK
.
2
Click on the
Diagnostics
button on the left
hand side of the ExpressNAV Storage
Manager.
3
Choose
Initialize and Verify Drives
to test
newly added drives that are not part of a RAID
Group. Choose
Read-Only Drive Test
to non-
destructively test any drives.
4
Click
Next.
5
If no drives appear in the information box, click
on the
System Scan
button.
If drives are available, click on the drives you
wish to verify, initialize or test; the drives are
highlighted.
6
Click
Commit
.
CAUTION
CAUTION
Do not restart the FastStream or
disconnect or power cycle drives during
Drive Initialization and Verification or you
must start the verification process from the
beginning.
7
A warning box appears. In the warning box,
verify that you want to complete the
configuration by clicking on
Yes
. Clicking on
No
ends the procedure without making a change.
8
The
Performance
tab appears showing what
tests are running and their results. You may
select other tests to run or continue on to other
tasks.
