ATTO Technology SC 5550E, Инструкция по установке и эксплуатации

Страница: 29 / 87

23
2 Click Next.
3 Chose a RAID level .
4 Choose an Initialization method (refer to
Initialization on page 22).
5 Choose an Auto-Rebuild option (refer to Auto-
Rebuild on page 21).
6 Select a Fault Tolerance (refer to Fault
Tolerance on page 22 ).
7 If all your drives do not appear in the Find
Drives box, click on System Scan .
8 Click Commit .
9 A warning box appears.
If you want to continue click
Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No .The Setup
Wizard page appears.
Audio
1 After choosing Audio, the Audio Setup
Wizard page appears.
For the SC 8250 only, skip to Step 3 .
Choose to use the same or a different node
name for each host Fibre Channel port to set up
for multipathing support.
• If you know you want all drives to be available
or unavailable to all Fibre Channel ports,
select
Yes or No . If you do not know, select
Not Sure.
• If you select Not Sure , you are asked a
series of questions to determine the correct
configuration for your needs and setup.
• Several definitions are listed in a grey box at
the bottom of the Audio Setup Wizard
screen which may help you determine
answers to the setup questions.
2 Click on Next .
Note
Depending on your choice and your current
system, the appliance may need to restart.
3 Choose an Initialization method (refer to
Initialization on page 22).
4 Choose an Auto-Rebuild option (refer to Auto-
Rebuild on page 21).
5 Select the number of users for this appliance.
6 Depending on the number of users and the
number of drives you have in your system, you
may be asked choose a
Fault Tolerance (refer
to Fault Tolerance on page 22 ).
7 If all your drives do not appear in the Find
Drives box, click on System Scan .
8 Click Commit.
9 A warning box appears.
If you want to continue click
Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No . The Setup
Wizard page appears.
General IT or Database
1 After choosing General IT or Database , the
Setup Wizard page appears.Choose an
Initialization method (refer to Initialization on
page 22).
2 Choose an Auto-Rebuild option (refer to Auto-
Rebuild on page 21).
3 If all your drives do not appear in the Find
Drives box, click on System Scan .
4 Click on Commit .
5 A warning box appears.
If you want to continue click
Yes. The
configuration completes and the Health and
Status Monitor page appears.
If you wish to start over, click No . The Setup
Wizard page appears.