30
ATTO Technology Inc. FastStream SC Installation and Operation Manual
6.1 Remote System Monitoring
You may set up the FastStream to send notifications using Email when certain events occur.
You may set up the FastStream to send notifications
when certain events occur using
Error Notification
page of the ExpressNAV Storage Manager.
You designate the person receiving notification of
conditions and the level of severity which prompt
notification using Email notification.
Types of errors
• Device/drive
errors
such as medium error,
aborted command and hard error
• Device/drive
transitions from online to offline
• Critical and warning temperature conditions
• Critical and warning voltage conditions
• Power recycle/power failure conditions
• Enclosure
issues,
when SES is Available
Warning messages
• device
down
• medium
error
• abort
command
Message severity levels
•
Critical:
critical event Emails
•
Warning:
warnings and critical event Emails are
sent
•
Informational:
information which you may want
to know but which probably does not require
action: only information messages are sent
•
All
: warnings, critical events and informational
messages
•
None
: no Emails are sent
Email notification
Phone home Email notification allows the FastStream
to send an Email message to you, a network
administrator or other users when certain events occur
with the FastStream.
Serious error messages are sent immediately, while
messages for less serious errors are sent every 15
minutes.
You may send Emails to up to five Email addresses
and designate which conditions prompt each Email
notification.
For example, a recipient with a critical severity level
only receives critical messages and not warning or
informational messages.
When an event occurs that warrants Email notification,
the FastStream sends the message; it cannot respond
to a rejection by a server for an invalid address.
Ensure all Email addresses typed in are valid.
Each Email is time stamped when it is sent as part of
the SMTP header information.
1
If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
controller in a standard browser. On the splash
screen, click
Enter Here.
In the box provided
,
type in your user name and password, and click
OK
.
2
The
Health and Status Monitor
page appears.
On the menu at the left hand side of the page,
choose
Manage
.
3
The
Manage Menu
page appears. Click on the
FastStream
SC
arrow.
4
Click the
Set up Error Notification
button.
5
Click
Next.
6
Click on the
Enabled
button for
Notification
Configuration.
7
Type in the sender address or use the default.
(Emails show this name in the
From
field).
8
Type or use the default SMTP Server (the
Email server) IP address or the name of the
SMTP server and, if required, the user name
and password used to log into the server.
9
Type in up to five Email addresses.
10 Choose
All
,
Critical
,
Warning, Informational
or None
for each Email address.
11 Click on the Send Test Email check box to test
the entered settings.
12 When all information is typed in, click
Commit
.
