manualshive.com logo in svg

Atop ABLELink SE5408, Руководство пользователя

Поделиться
Скачать
Atop ABLELink SE5408 Скачать руководство пользователя страница 7

User manual Version 1.1 
SE5408/SE5416 Multi-port

 

Serial Server

 

 

Copyright © 2010 ATOP Technologies, Inc. 

All rights reserved. Designed in Taiwan

   

- 6 - 

1. Introduction 

Overview 

Many industrial and commercial devices are equipped with serial communication ports—RS232, RS485, 
and RS422, and these serial ports typically have limited transmission distance. For instance, the 
transmission distance of RS232 at the transmission rate of 9.6 kbps is 15 m and that of RS422 at the rate 
of 110 kbps is 1.2 km. Examples of these serial devices include PLC controllers, card readers, display 
signs, security controls, CNC controllers, and etc. 

This distance constraint can be overcome by using a device called Serial-to-Ethernet server, or simply 
called 

Serial Server

 which converts a serial communication protocol into Ethernet-compatible data 

protocol. Once the data reaches any Ethernet network, its limit on transmission virtually vanishes. ATOP 
Technologies’ SE5408/SE5416 Multi-Port Serial Server family is designed for this specific purpose. The 
SE5408/SE5416 Multi-Port Serial Server transmits data between up-to-8-or-16 serial devices and 
up-to-8-or-16 TCP/UDP ports through an Ethernet IP network.    It also has two-relay output to indicate the 
Ethernet link status.    If the link is down, the relay output could be used to signal an operator.   

All ATOP’s serial servers can be set up over Ethernet using Telnet, Web browser, Serial Console, or our 
Windows utility software called, SerialManager. The SE5408/SE5416 Multi-Port Serial Server is packed in 
a rugged metal housing with 19-inch rack-mount and is ideal for industrial and manufacturing installation. 

Combining the SE5408/SE5416 Multi-Port Serial Server series’ internal computing resources with Linux 
Software Development Kit (SDK) makes it a good solution for high-performance programmable controllers 
and for time-critical and secure communication devices in industrial, telecommunication, transportation, 
banking, and hospital operations. 

Features 

ƒ

  RISC 32-bit 266 MHz CPU 

ƒ

  Standard 19-inch rack-mount 1U high metal housing 

ƒ

 Independent configuration of operation mode for each port 

ƒ

  Software selectable RS-232/RS-485/RS-422 RJ-45 connection 

ƒ

  Dual 10/100 Mbps Ethernet ports for network redundancy 

ƒ

  Support TCP in Server and Client mode and UDP mode and Virtual COM for multilink mode 

ƒ

  Configurable via LCM buttons, Serial console, Telnet, Web and Windows-based utility program 

SerialManager 

ƒ

  Relay output indicator for network link status 

ƒ

  LCM indication with 4 keypad setting 

Содержание ABLELink SE5408











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды