User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 10 -
SE5016:COM1 – COM16
SE5008:COM1– COM8
RS232, 9600 bps, 8 data bits, None Parity bit, 1 stop bit, None Flow
Control, Buffer Disabled,
Packet Delimiter timer: 1ms
Serial Port 1 –16
Type: TCP Server, Local port 4660 - 4675, Filter = 0.0.0.0,
Virtual COM disabled (for SE5008: Port 1 - 8, TCP local port 4660 -
4667)
SNMP
SysName of SNMP
0060E9-XXXXXX
SysLocation of SNMP
Location
SysContact of SNMP
Contact
SNMP Enable
Read Community
Public
Write Community
Private
SNMP Trap Server
0.0.0.0
Table 1.
Factory Default Settings
NOTE: One may press the “Reset” button on the front panel with a paper clip for 5 seconds to
restore the server to the factory default settings.
Device IP Address Assignments
Configure using SerialManager
First, please install our configuration utility program
SerialManager
that comes with Product CD. To find
our serial server devices on your network, press “Scan”, and the list of the devices is shown in the main
window. To configure each device, click the selected device (default IP: 10.0.50.100) to login with the
default username and password. After successful login, click “Configuration=> Network Setting” to pop up
the following dialogue box:
Fig 3. Network settings with SerialManager
You may proceed to change the IP address to avoid any IP address conflict with other hosts on your LAN
network or to connect the device to your existing LAN. Please consult your system administrator if you do
