manualshive.com logo in svg

Atop ABLELink SE5408, Руководство пользователя

Поделиться
Скачать
Atop ABLELink SE5408 Скачать руководство пользователя страница 3

User manual Version 1.1 
SE5408/SE5416 Multi-port

 

Serial Server

 

 

Copyright © 2010 ATOP Technologies, Inc. 

All rights reserved. Designed in Taiwan

   

- 2 - 

FCC WARNING 

Class A certification for Serial–to-Ethernet Server (Model SE5408/SE5416) 

This equipment has been tested and found to comply with the limits for Class A digital devices pursuant to 
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated under commercial environment. This equipment generates 
uses and radiates radio frequency energy and, while not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at his owned expenses. A shielded-type power cord is required in order to meet the FCC 
emission limitation and also to prevent interference to the nearby radio and television reception. It is 
essential that only the supplied power cord can be used. Use only shielded cables to connect other 
devices to the RS-232/RS-422/RS-485 ports on this equipment. Any change or modification not expressly 
approved by ATOP Technologies could void the warranty for the equipment. 

Содержание ABLELink SE5408











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды