manualshive.com logo in svg

Atop ABLELink SE5408, Руководство пользователя

Поделиться
Скачать
Atop ABLELink SE5408 Скачать руководство пользователя страница 34

User manual Version 1.1 
SE5408/SE5416 Multi-port

 

Serial Server

 

 

Copyright © 2010 ATOP Technologies, Inc. 

All rights reserved. Designed in Taiwan

   

- 33 - 

6. Telnet 

Configuration  

The SE5408/SE5416 Multi-Port Serial Server device also has a built-in Telnet server program such that 
users can also configure the device using Telnet console software.  To start the device configuration 
using Telnet console, please go to Windows Command software (Start=>Run) and use “telnet” command 
to access the device. In the “Run” window, enter “

telnet device_IP_address

” (For example, telnet 

10.0.50.100 if the device is connected to LAN1 port) as shown in Fig 35. The system will prompt for 
Username and Password.  After the valid username and password are entered, the main menu shall 
appear in Fig 36. It shows all the configurations that can be used to configure the device. 

Note: You can always press “ESC” key to return to the upper layer menu. 

Note: If the device does not receive any command within 3 minutes, Telnet connection will be 

automatically terminated. 

 

Fig 35.  System Login :Telnet 

 

Fig 36.  Main Menu :Telnet 

Overview: Telnet 

Operation: Main

Æ

[1] Overview 

To show the overview information of the device, enter “1” on the keyboard to select “[1] Overview”. The 
system overview page gives the general information of Model Name, IP address, MAC address, and 
Kernel and AP version of the device. 

Содержание ABLELink SE5408











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды