User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 52 -
Fig 60. Enabling Virtual COM: Telnet
Mapping “Port Number” Using “Serial-IP” program
One can only configure
Virtual Ports
on the host computer using the “Serial-IP” program. To do so, first
on Window Start Menu, go to
\All Programs\Serial-IP
for Serial/IP Control panel, select a Virtual COM
port, and fill in the IP Address and the (TCP) Port Number to be mapped as shown in Fig 61.
Fig 61. Serial/IP Control Panel
On “User Credentials”, the default is No Login Required. If checked, the Virtual COM Redirector
(Radial Server) must authenticate the user name and password.
Click Configuration Wizard to pop up the wizard window as shown in Fig 62 and then click Start.
This window verifies that the Virtual COM Redirector communicates with the serial server
properly. If Log does not show errors, click Use Settings, and return to the Control Panel
On COM Port Options, check the Restore Failed Connections box if any network transmission
is interrupted.
