Atmel SAM9X25, Руководство пользователя

Страница: 181 / 1145

181
11054A–ATARM–27-Jul-11
SAM9X25
181
11054A–ATARM–27-Jul-11
SAM9X25
22.3 Master Clock Controller
The Master Clock Controller provides selection and division of the Master Clock (MCK). MCK is
the clock provided to all the peripherals and the memory controller.
The Master Clock is selected from one of the clocks provided by the Clock Generator. Selecting
the Slow Clock provides a Slow Clock signal to the whole device. Selecting the Main Clock
saves power consumption of the PLLs.
The Master Clock Controller is made up of a clock selector and a prescaler. It also contains a
Master Clock divider which allows the processor clock to be faster than the Master Clock.
The Master Clock selection is made by writing the CSS field (Clock Source Selection) in
PMC_MCKR (Master Clock Register). The prescaler supports the division by a power of 2 of the
selected clock between 1 and 64, and the division by 6. The PRES field in PMC_MCKR pro-
grams the prescaler.
Each time PMC_MCKR is written to define a new Master Clock, the MCKRDY bit is cleared in
PMC_SR. It reads 0 until the Master Clock is established. Then, the MCKRDY bit is set and can
trigger an interrupt to the processor. This feature is useful when switching from a high-speed
clock to a lower one to inform the software when the change is actually done.
Figure 22-1. Master Clock Controller
SLCK
Master Clock
Prescaler
MCK
PRES CSS
MAINCK
PLLACK
UPLLCK
To the Processor
Clock Controller (PCK)
PMC_MCKR PMC_MCKR