Atlas SUNTEST CPS, Руководство по эксплуатации

Страница: 7 / 32

- 7 -
Operating manual SUNTEST CPS / CPS+
1
Notes for safe operation
Please also follow the safety instructions in the individual chapters.
Usage as authorized:
• SUNTEST CPS / CPS+ are used for exposure and weathering of material samples.
• The unit is suitable for continuous operation.
• The unit has been tested for electromagnetic compatibility and for installation in an industrial application.
Unauthorized usage:
• No substances of materials that are inflammable or that can explode should be used in the test chamber.
• No substances or materials that may release toxic substances in any form should be used in the test chamber.
• The device must not be used for drying or heating objects or foodstuffs.
Safety instructions for commissioning:
WARNING - Pull out the power plug:
Coming in contact with live parts can result in a possibly fatal electrical shock. When assembling the irra-
diance system, set the ON (I) / OFF (O) switch to the "OFF (O)" position and pull out the power plug. Secure
the power plug from being inserted again.
WARNING - UV radiation being emitted:
If the specimen table is not used, UV radiation is emitted on the lower side of the unit and can result in
damage to skin and retina. Always use the specimen table when the unit is running !
WARNING - UV radiation being emitted:
If the mirrors (figure 15) are not used, UV radiation is emitted on the upper side of the unit and can result in
damage to skin and retina. Always mount the mirrors.
CAUTION - Danger of cuts and gashes:
The optical filters have sharp edges that may cause cuts and gashes.
Always wear protective gloves when working on the radiation system.
The device fulfills the following safety specifications:
•
DIN EN Part 1:1991-11, Part 2:1995-06
Safety of machinery
• DIN EN 60601 Part 1:1994-05
Safety regulations for electrically operated measuring, controlling, regulating and laboratory equipment. General
requirements.
• DIN EN 50178 (VDE0160): 1998-04
Electronic equipment for use in power installations
• DIN EN 50082 (VDE 0839) Part 2:1997-11
Electromagnetic compatibility, Professional Basic Norm, immunity from distortion. Part 1: Residential areas, busi-
ness and industrial areas as well as small industries. Part 2: Industrial area.
Disposal:
•
Please dispose of the packing materials according to the applicable disposal guidelines. There is a list given in
chapter 2.2, "Packing Material".
• Xenon lamps are special waste and may be sent to ATLAS MTT B.V. for disposal.
• Old units contain re-usable materials. Therefore, please do not simply dispose of old units at the nearest garbage
dump, but ask your city or community administration for the possibilities of recycling.
1.2 Instructions for safe operation