Atlas SUNTEST CPS, Руководство по эксплуатации

Страница: 28 / 32

Operating manual SUNTEST CPS / CPS+
- 28 -
9.1.3 Radiation system
The components of the radiation system must be cleaned
at least every six months. The irradiance system must be
disassembled in the opposite sequence to that described
in chapter 6.2, "Assembling the irradiance system".
Optical filters:
•
Clean the optical filters with a soft leather cloth or brush
before installing them.
• Carefully wipe the optional filter "UV special glass" with
a starchless cloth that has been moistened with 20 %
citric acid solution.
Xenon lamp:
•
Clean the cold Xenon lamp with a starch-free cloth that
is moistened with some spirit.
Mirrors:
•
Clean the mirrors, before mounting, with a soft leather
cloth or a brush.
9.1.4 Air filter
CAUTION - Damage to the unit:
The reflector and the radiation system are sensitive
to dust. Unfiltered cooling air will adversely affect
the functioning of the unit.
The air filters must be cleaned every six months.
The air filters must always be installed during ope-
ration.
Procedure:
•
Remove the filter mat from the filter opening on the
rear side of the unit.
• Beat the dirty filter mat or wash it with lukewarm water
and some mild soap solution (washing liquid).
If the filter mat is particularly dirty, replace it (for ident.
no., see chapter 9.2, "Spare parts").
• Let the filter mat dry and re-insert it in the filter opening
with the soft layer on the outside.
9
Cleaning / Consumables
9.1 Cleaning
WARNING - Pull out the power plug:
Coming in contact with live parts can result in
a fatal electric shock. For all cleaning work,
set the ON (I) / OFF (0) switch to the “OFF (0)”
position and pull out the power plug. Secure
the power plug against getting inserted again.
9.1.1 Outer surfaces and operating elements
Wipe the unit with a mild soap solution (washing agent)
and a soft cloth.
9.1.2 Reflector
To ensure uniform illumination of the test chamber, the
reflector has to be kept clean.
CAUTION - Damage to the reflector:
The reflecting coating of the test chamber walls is
sensitive to scratches.
Do not use any solvents, or any rough or hard clean-
ing agents for cleaning the reflector.
Procedure:
•
Wipe the reflector with a soft cloth that has been moi-
stened with the usual commercially available washing
agents and rub dry till it is free from streaks.