13
Bead Breaker Arm Installation
Install the Bead breaker arm in its housing
using the dedicated screw.
- 1 screw M16x100mm
- 1 self lockin nut M16
Do not tight the bolt yet.
When inserting the cylinder rod (first remo
-
ve the special nut assembled on it) into the
rotating pin, make sure that the flat side of
the pin is positioned on the outer side of
the machine (where the nut is going to be
assembled again).
Install the special nut on the bead breaker
cylinder rod.
Tight it properly.
Allen wrench 8mm is required.
