18
The Bead pressing System HP3-PW is
packed separately, the needed fastenings,
retainers and fitting are contained inside its
packing.
Remove the filter lubricator from the ma
-
chine.
Make sure to install the dedicated seeger
ring and washer on the internal side of the
platform’s shaft.
They will be already assembled on the lift
pin.
Seeger pliers is required
Assemble the lifter pedal (with its support)
on the machine body (they are located
located inside the tire changer body, the
screws will be already assembled on the
machine’s body).
13mm wrench is required
Assemble the pedal cover and reinstall the
side panel of the machine
.
10mm wrench is required for the pedal
cover.
Pneumatic bead depressor system installation
